| |
||||||
|
||||||
|
|
|
||||
| Single
Function Transducers General Specifications Below |
| TRANSDUCER GENERAL SPECIFICATIONS | |
| ENVIRONMENTAL Working temperature 0 to +60 deg C Functional temperature -25 to +70 deg C Storage temperature -55 to +85 deg C Temperature coefficient 0.02% per deg C (100 ppm / °C) Relative humidity 95% non condensing Class of climate HSE complying with DIN 40040 -3 complying with VDE/VDI 3540 INSULATION Test Voltage 4kV RMS 50Hz 1min. between Input / Case / Auxiliary / Output Impulse test EMC 5kV transient complying with IEC 801 / EN55020 HF interference test EHF 2.5kV 1MHz complying with IEC 255-4 Protection class II complying with IEC 348 BS 4753 / DIN 57411 / VDE 0411 APPLIED STANDARDS General IEC 688 / BS 6253 / VDE/ VDI 2192 Safety BS EN61010 DIN 57411 / VDE 0411 ANSI C37 Surge withstand IEC 801 / EN 55020 ANSI C37-90a Radio screening RFI degree N complies with VDE 0875 EMC Emissions EN50081-2 Immunity EN50082-1 APPROVALS cU.L. Approval File No E157034 |
ACCURACY Class ±0.2 % complying with IEC 688 Calibration temperature 23°C Temperature coefficient 0.01% / °C (100 ppm / °C) Stability 0.05 % per annum non cumulative Warm up time <15 min OUTPUT Rated value See individual product pages. Load resistance 1mA <15 kOhm 5mA <3 kOhm 10mA <1.5 kOhm 20mA < 0.75kOhm 4-20mA < 0.75kOhm Load resistance volts 1, 5 & 10 volts >1 kOhm (M100-VA1,VA3 only) 1, 5 & 10 volts > 50kOhm Load influence <0.1 % Ripple <0.5% peak-peak at full load Response time <200 msec for 0-99 % at full load Overload <2 x rated value at full load No load voltage <27 V ENCLOSURE Fixing Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584 Mounting Any position Enclosure Code Case IP 50 / terminals IP 30 Complies with IEC 529 BS 5490 DIN 40050 |
|
| Home | About Us |
Locations |
Customer Service |
Representatives |
Meters |
Transducers |
Protective
Relays Transformers | Shunts | Cam Switches | Contactors | Resistors | Battery Chargers | Other Special DC |
|
