MultiTek Frequency Single Transducer
| SELECTION GUIDE M100-FA1 Self powered true zero outputs M100-FL1 Auxiliary powered live zero outputs M100-FX1 Auxiliary powered true zero outputs TYPICAL APPLICATIONS The M100 series of frequency transducers are designed to measure frequency in single and 3 phase systems. The A.C. Input is converted to a D.C. Output, that is directly proportional to the change in input frequency within a specified span. The M100-FA1 is self powered. (No auxiliary required) The working voltage range is 75-125% of the nominal voltage. The M100-FL1 is auxiliary powered. The outputs are live zero either 4mA or 1 volt. The auxiliary enables the working voltage range to be 15-125%. The M100-FX1 is essentially the same as the FA1 but an auxiliary is provided to enable the unit to have a working voltage range of 15-125%. All types of the above frequency transducers are typically used to monitor and control frequency in such applications as 3 phase mains supplies, A.C. Generating sets and process control etc. ORDERING INFORMATION Product code Input Hz Output Aux Freq. Options M100-FL1 45-55Hz 4-20mA 230V 50Hz OPTIONS 1. Non standard inputs / outputs only as far as technically acceptable. 2. A.C. Auxiliary in range 57.7 to 450 volts 3. Calibration at temperature other than 23°C |
TECHNICAL SPECIFICATION INPUT Rated value Un 57.8 < 600V Power consumption <1.5 VA (FA1) <1 VA (FL1 FX1) Working range 75-125% Un (FA1) 15-125% Un (FL1 FX1) Measuring range 45-55 / 45-65 / 55-65 / 360-440Hz Overload continuous 1.5 x Un Overload for 1 sec. 2 x Un OUTPUT Rated value mA 0-1 / 5 / 10 / 20mA (FA1 FX1) Rated value mA 4-20mA (FL1) Rated value volts 0-5 / 10 V (FA1 FX1) Rated value volts 1-5 V (FL1) ADJUSTMENT Zero No adjustment Span No adjustment AUXILIARY A.C. Voltage 115 / 230 / 400 V (± 25% / 45-65 Hz / < 2 VA) D.C. Voltage 24 / 48 / 110 V ( ±20% / galvanically isolated / <3W) Note M100-FA1 is self powered WEIGHT & CASE SIZE Approx. 0.4kg. 55mm case |